2 Relay Module 10A / 250V – Opto-Insulated Inputs 3-24V for Arduino etc.
CAD 3.95
Need more than we have? Order now, we will ship when back in stock. Lead time about 2-3 weeks. See our backorder policy. |
- Description
- Reviews (1)
Description
The 2 Relay Module needs a power supply of 5VDC. The optoisolated inputs can handle 3-24VDC control voltage, with a maximum input current of 22mA at 24VDC. A jumper can switch between 2 modes: If the jumper cap is set to VCC and JD-VCC, relays and opto inputs are using the same 5VDC power supply. If the jumper is open, a separated 5VDC power supply can drive the relays and the inputs are open for voltages up to 24VDC. The inputs are LOW-active. It means the output of a microcontroller (like Arduino or Raspberry) draws the input current to GND. The LOW level activates the relay, and a high level (or 3-state level) deactivates the relay.
High-Current relay modules (30A) are available as well.
Finally, we offer relay modules for the ESP-01 IoT module, WeMos D1 Mini, remote-controlled relays, and a WiFi 4-Channel relay DIY kit.
1 review for 2 Relay Module 10A / 250V – Opto-Insulated Inputs 3-24V for Arduino etc.
Add a review
You must be logged in to post a review.
Related products
-
-
-
CANADUINO ZIF Socket Programming Shield for Arduino V2 DIY Soldering Kit
4.50 out of 5 -
100 x LED Red 3mm Round – Tinted – Clear – Standard Package T-1
0 out of 5 -
WEMOS D1 Mini Relay Shield 250VAC 10A
4.00 out of 5 -
ESP-01 Relay Module for ESP8266 10A 250V max.
5.00 out of 5 -
100 x LED Green 3mm Round – Tinted – Clear – Standard Package T-1
0 out of 5 -
4 Relay Board 30A 250V – Optoisolated – 5V DC Supply
0 out of 5
Stan Wetmore –
Great little relay board. I use it on a Raspberry Pi at 3.3v with a logic level chip and it works great. I power the board with a 5v power supply. Considering the Covid19 issues it came very quickly.