RobotDyn Arduino Pro Mini ATmega328P – 3.3V 8MHz – Boot Loader

SKU: 4260474031160.

RobotDyn Arduino Pro Mini ATmega328P – 3.3V 8MHz – Boot Loader

$ 5.50

In stock

5 - 910 %
10 - 99915 %

RobotDyn Electronics Modules and Arduino compatible Boards are well known for their excellent Quality. From circuit board design, showing a smarter development than most competitors, to the Quality of automated and manual assembling.

RobotDyn Products are new in our lineup, and we are proud to be able to showcase these outstanding high quality products.

This is a 3.3V Arduino running the 8MHz bootloader. Arduino Pro Mini does not come with connectors assembled (but included) so that you can solder in any connector or wire with any orientation you need.

The Arduino Pro series is meant for users that understand the limitations of system voltage (3.3V), lack of connectors, and USB off board. We really wanted to minimize the size and cost of an Arduino. In order to accomplish this we used all SMD components, made it two layer, etc. This board connects directly to an FTDI or CH340 USB-TTL adapter board and supports auto-reset.

There is a voltage regulator on board so it can accept voltage up to 12VDC. If you’re supplying unregulated power to the board, be sure to connect to the “RAW” pin on not VCC.

This great and advanced version also breaks out ADC6 and ADC7 pins; a feature missing on many similar products other manufacturers.

  • Microcontroller: Atmel ATmega328
  • Logic Level: 3.3 V
  • Input Voltage (RAW): 3.1-12 V
  • Digital I/O Pins: 14 (6 provide PWM capability)
  • Analog Input Pins: 8 (6 can be used as digital I/O)
  • Other Interfaces: 1x seriell UART, 1x SPI, 1x I²C
  • LEDs for Power and “L” (D13)
  • DC Current per I/O Pin: 40 mA
  • Flash Memory: 32 KB (2 KB used by boot loader)
  • SRAM: 2 KB
  • EEPROM: 1 KB
  • Clock Speed: 8 MHz
  • Dimension: 33 x 18 x 6 mm
  • Weigth: 2.7 g
Weight0.006 kg



There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.